Menu 1

TELEPHONE

Menu 2

VOICE

Menu 3

CLOCK

Menu 4

TIME DELAY

Menu 5

ACKNOW-
LEDGE

Menu 6

TIME BETWEEN CALLS

Menu 7

PAGER DELAY

* Enter New Telephone #

* Record

* Clock Set

1.Clock On
2 Clock Off
3 Clock Set

* Change Delay Times

* Reset Fail Safe Call Back Timer

0 = No Delay

0 = No Delay

# View Tel No

# Playback Alarm

# Clock Set

# View Delay

# Review acknowledge codes

1 = 01 Min

1 = .5 Sec

1. Playback Current Alarm

1. Reset Call Back Timer To [0]

1. Set Time Delay on the Fail-Safe Call Back Timer

2 = 03 Min

2 = 1 Sec

2. Playback All Alarms & Replies

2. Store Data on Chip

2. Change Access Code

3 = 05 Min

3 = 1.5 Sec

3. Setup Telephone Sequence

3. Get Stored Data

3. Set the station ID number for pager use.

4 = 08 Min

4 = 2 Sec

4. View Telephone Sequence

Enter 1 for Seq 1

Enter 2 for Seq 2

4. Record 2nd List

4. Display the telephone number

for H & R Factory Service

4. Display Any Alarm [1-4]; For All Alarms Enter [9]

4. View the station ID code number.

5 = 10 Min

5 = 2.5 Sec

5. Reset Tel Seq. Counter Back to 1

5. Playback 2nd List

5. Initial set up of time delays, seq#'s, ring count, etc.

5. Select A/C fail

yes or no & enter two digit time delay

[0] for sec delay

5. Activate relay on interface board

6 = 12 Min

6 = 3 Sec

6. Set time to wait for a response (default 04)

[offset]

6. Record Menus

6. Reset system

6. Activate acknowledge and activate fail-safe time delay

7 = 15 Min

7 = 3.5 Sec

7. Set ring counter; input {*}; view {#} (default 06)

[ringct]

7. Playback MENU

Messages

8 = 18 Min

8 = 4 Sec

8.

8 Playback ALL

recorded replies menu 1, 2, & 3

8. Reset A/C power fail signal flag

9 = 20 Min

9 = Max Delay

9.

9.

9. Set Fail Safe Call Back timer ON and reset time delays to initial values

0. Exit to Main Menu

0. Exit to Main Menu

0. Exit to Main Menu

0. Exit to Main Menu

0. Exit to Main Menu